Hardik Electronics

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Standard 19” Rack Mount Design ; Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

RF Isolation : -  

• Front door will open left to right.
• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front door of shielded enclosure, second at rear side of shielded enclosure.
• I/O Access panels on rear wall of the shielded enclosure.

• 120MM 1500 RPM / 73 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter   (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 5 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features:-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Standard 24” Rack Mount Design ; Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

RF Isolation : -  

Mechanical Details-

• Front door will open left to right.
• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front door of shielded enclosure, second at rear side of shielded enclosure.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box:-

• 120MM 1500 RPM / 73 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter   (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 5 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling and right side inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features:-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Standard 24” Rack Mount Design ; Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

RF Isolation : -  

• Front door will open left to right.
• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front door of shielded enclosure, second at rear side of shielded enclosure.
• I/O Access panels on rear wall of the shielded enclosure.

• 120MM 1500 RPM / 73 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter   (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 5 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling and right side inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Standard 19” Rack Mount Shield Box. Rugged construction for long life.
• Customized Size to suit application specific requirements ,ideal for test platforms.

• Total Weight of Unit – 23 Kg
• Front door will open left to right.
• 1 fan: on the ceiling of shielded enclosure
• 2 cut-off waveguide air vents: 1 on the Ceiling. Second at rear side.
• I/O Access panels on rear wall of the shielded enclosure. 

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Folding Socket with Mains Male Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features:-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
•  Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Customized Size to suit application specific requirements ,ideal for test platforms.

RF Isolation : -  

Mechanical Details:

• Door will open from top front to rear
• 1 fan: At right side wall of shielded enclosure
• 3 cut off waveguide air vents: One at top door. One at front side and one at right side wall
• I/O Access panels on sides of the shielded enclosure.

• 60 mm 3000 rpm/54 cfm Ultra Silent 12VDC Cooling Fan with Universal Input Voltage Adapter
• Power strip with 3 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box
• Wooden-Mica Base Plate inside the box as an insulated surface-to place DUT and other units inside the box

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life
• Customized Size to suit application specific requirements , ideal for test platforms.

RF Isolation : -  

Mechanical Details :-

• Total Weight of Unit – 28.0 Kg
• Front door will open left to right.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 4 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features:-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
•  Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Customized Size to suit application specific requirements ,ideal for test platforms.

RF Isolation : - 

Mechanical Details:

• Door will open from top front to rear
• 1 fan: At right side wall of shielded enclosure
• 3 cut off waveguide air vents: One at top door. One at front side and one at right side wall
• I/O Access panels on sides of the shielded enclosure.

• 60 mm 3000 rpm/54 cfm Ultra Silent 12VDC Cooling Fan with Universal Input Voltage Adapter
• Power strip with 3 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box
• Wooden-Mica Base Plate inside the box as an insulated surface-to place DUT and other units inside the box

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features:-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
•  Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Customized Size to suit application specific requirements ,ideal for test platforms.

RF Isolation : -  

Mechanical Details:

• Door will open from top front to rear
• 1 fan: At right side wall of shielded enclosure
• 3 cut off waveguide air vents: One at top door. One at front side and one at right side wall
• I/O Access panels on sides of the shielded enclosure.

• 60 mm 3000 rpm/54 cfm Ultra Silent 12VDC Cooling Fan with Universal Input Voltage Adapter
• Power strip with 3 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box
• Wooden-Mica Base Plate inside the box as an insulated surface-to place DUT and other units inside the box

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life
• Customized Size to suit application specific requirements , ideal for test platforms.

RF Isolation : -  

Mechanical Details :-

• Total Weight of Unit – 28.0 Kg
• Front door will open left to right.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 4 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features:-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
•  Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Customized Size to suit application specific requirements ,ideal for test platforms.

RF Isolation : -  

Mechanical Details:

• Door will open from top front to rear
• 1 fan: At right side wall of shielded enclosure
• 3 cut off waveguide air vents: One at top door. One at front side and one at right side wall
• I/O Access panels on sides of the shielded enclosure.

• 60 mm 3000 rpm/54 cfm Ultra Silent 12VDC Cooling Fan with Universal Input Voltage Adapter
• Power strip with 3 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box
• Wooden-Mica Base Plate inside the box as an insulated surface-to place DUT and other units inside the box

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features:-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
•  Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Customized Size to suit application specific requirements ,ideal for test platforms.

RF Isolation : -  

Mechanical Details:

• Door will open from top front to rear
• 1 fan: At right side wall of shielded enclosure
• 3 cut off waveguide air vents: One at top door. One at front side and one at right side wall
• I/O Access panels on sides of the shielded enclosure.

• 60 mm 3000 rpm/54 cfm Ultra Silent 12VDC Cooling Fan with Universal Input Voltage Adapter
• Power strip with 3 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box
• Wooden-Mica Base Plate inside the box as an insulated surface-to place DUT and other units inside the box

We are leading Manufacturer and Exporter of  RF shielded enclosure. Our RF shielded enclosure are available Wide range of I/O connector options. Thick RF absorbing foam deadens standing waves and reflections.

This RF shielded enclosure provides Higher Level Isolation up-to 6GHz for accurate performance. This RF shielded enclosure is equipped with shielded power filters for power connection in the box while still blocking all wireless signals.

Features of RF shielded enclosure:

• Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.
• 24" Rack Mount RF Shield Box with Turn Table.
• Designed and Developed for WLAN, Wireless device testing.
• Ideal Shield Box for 802.11a, b, g, n, ac, ax
• Bluetooth, RFID, 3G, 4G Device testing

RF Isolation:

• ≥ 130 dB from 20 MHz to 1 GHz
• > 120 dB at 3 GHz
• > 90 dB at 5 GHz
• > 90 dB at 6 GHz

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open front left to right.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open front left to right.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open front left to right.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open front left to right.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open front left to right.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open front left to right.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features:-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Standard 24” Rack Mount Design ; Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

RF Isolation : -  

Mechanical Details-

• Front door will open left to right.
• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front door of shielded enclosure, second at rear side of shielded enclosure.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box:-

• 120MM 1500 RPM / 73 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter   (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 5 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling and right side inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Standard 19” Rack Mount Design ; Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details-

• Front door will open left to right.

• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front door of shielded enclosure, second at rear side of shielded enclosure.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box:-

• 120MM 1500 RPM / 73 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter

• (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 5 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features:-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Standard 24” Rack Mount Design ; Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

RF Isolation : -  

Mechanical Details-

• Front door will open left to right.
• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front door of shielded enclosure, second at rear side of shielded enclosure.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box:-

• 120MM 1500 RPM / 73 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter   (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 5 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling and right side inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Standard 19” Rack Mount Design ; Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

• Front door will open left to right.

• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front door of shielded enclosure, second at rear side of shielded enclosure.
• I/O Access panels on rear wall of the shielded enclosure.

• 120MM 1500 RPM / 73 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter

• (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 5 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Standard 19” Rack Mount Design ; Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

• Front door will open left to right.

• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front door of shielded enclosure, second at rear side of shielded enclosure.
• I/O Access panels on rear wall of the shielded enclosure.

• 120MM 1500 RPM / 73 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter

• (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 5 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac , ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Table Top design for the convenience of testing.

• Total Weight of machine – 12 Kg
• Door will open from top front to rear.
• 2 cut-off waveguide air vents:1 on the door of shielded enclosure.1 Waveguide at the rear side of shielded enclosure.
• 1fan:  At rear side wall of shielded enclosure
• I/O Access panels on both side wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 60MM 4700 RPM ± 15 % a rated values / 26.4 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter.
• Wonpro Power strip with 3Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

RF Isolation : -  

Mechanical Details :-

• Front door will open left to right.
• 1 fan:  At rear side wall of shielded enclosure.
• 2 cut-off waveguide air vents: First at front door. Second at rear side.
• I/O Access panels on rear wall of the shielded enclosure.
• One handle on Ear and One handle on the door for ease of opening and closing the door.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter(Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 5 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Compact Bench-top design for convenience of testing.

RF Isolation : -               

Mechanical Details :-

• Total Weight of Unit – 20.0 Kg
• Front door will open top to bottom
• 1 fan:  At rear side wall of shielded enclosurE.
• 2 cut-off waveguide air vents: First at front side. Second at rear side.
• I/O Access panels on rear wall of the shielded enclosure.

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter  (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

•  Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
•  Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.  
• Standard 19” Rack Mount Design ; Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

•  Total Weight of Unit – 33.00 Kg.
•  Front door will open left to right.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: two at front door of shielded enclosure. two at rear side of shielded enclosure.
• I/O Access panels on rear wall of the shielded enclosure.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G FR1 Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Portable / Vertically Stackable Shield Box. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

• Total Weight of Unit – 108 Kg.
• Front door will open left to right.
• 1 fan:  At rear side wall of shielded enclosure.
• 3 cut-off waveguide air vents: Two on Side Walls. Third at rear side Wall.
• I/O Access panels on left wall of the shielded enclosure.

• 300MM 1000 RPM / 660 CFM – 230VAC / 50 Hz Exhaust Fan with 4 Step Speed Regulator & C14 IEC Connector.
• Rack Mount Rails on Both Side Walls – With 3U Blank Plate on Right Wall with 16Amp Socket Connected to Power Filer.
• 2 Nos. Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac , ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Table Top design for the convenience of testing.

• Total Weight of machine – 12 Kg
• Door will open from top front to rear.
• 2 cut-off waveguide air vents:1 on the door of shielded enclosure.1 Waveguide at the rear side of shielded enclosure.
• 1fan:  At rear side wall of shielded enclosure
• I/O Access panels on both side wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 60MM 4700 RPM ± 15 % a rated values / 26.4 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter.
• Wonpro Power strip with 3Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Full Turn-key RF Test-bed is Spectacular opportunity for customer to focus only on testing. Reducing time to test, saving expensive engineering resource and allows more time to debug/test.

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be 
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life
• Fully portable design equipped with caster wheels for ease of movement.
• Customized Size to suit application specific requirements ,ideal for test platforms.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac , ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Table Top design for the convenience of testing.

RF Isolation : -

Mechanical Details :-

• Total Weight of machine – 12 Kg
• Door will open from top front to rear.
• 2 cut-off waveguide air vents:1 on the door of shielded enclosure.1 Waveguide at the rear side of shielded enclosure.
• 1fan:  At rear side wall of shielded enclosure
• I/O Access panels on both side wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 60MM 4700 RPM ± 15 % a rated values / 26.4 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter.
• Wonpro Power strip with 3Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac , ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Table Top design for the convenience of testing.

• Total Weight of machine – 12 Kg
• Door will open from top front to rear.
• 2 cut-off waveguide air vents:1 on the door of shielded enclosure.1 Waveguide at the rear side of shielded enclosure.
• 1fan:  At rear side wall of shielded enclosure
• I/O Access panels on both side wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 60MM 4700 RPM ± 15 % a rated values / 26.4 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter.
• Wonpro Power strip with 3Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

• ≥ 130 dB from 20 MHz to 1 GHz
• > 120 dB at 3 GHz
• > 90 dB at 5 GHz
• > 90 dB at 6 GHz

• 19" Rack Mount RF Shield Box.
• Designed and Developed for WLAN, Wireless device testing.
• Ideal for 802.11a, b, g, n, ac
• Bluetooth, RFID, 3G Device testing

Features:

• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 6GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Standard 19” Rack Mount Design ; Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details-

• Front door will open left to right.

• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front door of shielded enclosure, second at rear side of shielded enclosure.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box:-

• 120MM 1500 RPM / 73 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter

• (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 5 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

STE 3000 Equivalent RF Shielded Test Enclosure Key Benefits :

• Wireless device testing
• Perfect for 802.11a, b, g, n
• Bluetooth, RFID, 3G testing
• Wide variety of I/O options
• Super isolation up to 18GHz
• Stock models to fit your custom applications

STE 3000 Equivalent RF Shielded Test Enclosure Specifications :

• RF absorbent foam liner
• Exclusive double lip RF tight gasket
• Universal I/O connector interface plate
• RF tight "hands-on" silver mesh gloves
• RF tight illuminated viewing window
• Gas filled cover strut
• Designed for hands-on adjustment and alignment of devices

•  
  • -90dB @ 1GHz
  • -90dB @ 3GHz
  • -80dB @ 6GHz

•  
  • Outside: 12.75"H x 18"W x 12"D
  • Inside: 8"H x 17"W x 10.5"D

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Standard 19” Rack Mount Design ; Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

• Front door will open left to right.

• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front door of shielded enclosure, second at rear side of shielded enclosure.
• I/O Access panels on rear wall of the shielded enclosure.

• 120MM 1500 RPM / 73 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter

• (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 5 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life.
• Customized size to suite application specific requirements , Ideal for test platforms.

Mechanical Details :-

• Front door will open Left to Right.1 fan:  At back side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front side. Second at rear side.
• I/O Access panels on back wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM – Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features:-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Standard 19” Rack Mount Design ; Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

RF Isolation : -