Hardik Electronics

Features :-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life
• Fully portable design equipped with caster wheels for ease of movement.
• Standard Rack Size to suit application specific requirements ,ideal for test platform.
  
  

RF Isolation : -  

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life
• Fully portable design equipped with caster wheels for ease of movement.
• Standard Rack Size to suit application specific requirements ,ideal for test platform.
  
  

RF Isolation : -  

• Front door will open Left to Right.
• 8 Fan:  All fans on the ceiling of shielded enclosure
• 18 cut-off waveguide air vents: 8Nos. on the ceiling. 5Nos. each of the two side walls.
• I/O Access panels on left side wall of the shielded enclosure.
• Castor Wheels on the base of shield box with shield box @ approx. 100mm height from ground.

 
Standard Accessories Included with the Box :-

• 8 Nos. - 120MM 1300 RPM / 65 CFM - Silent 230VAC Cooling Fan (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan with Power Adaptor – On Demand)
• 1 Nos. – Rack Rail Mount Power strip with 10 Way Universal Socket.
• 6 Level Slider Shelf Arrangement (Removable) inside the shield box for placement of devices.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life
• Fully portable design equipped with caster wheels for ease of movement.
• Customized Size to suit application specific requirements ,ideal for test platforms.

RF Isolation : -

Mechanical Details :-

• Front door will open Top to Bottom.
• 3 Fan:  2 Fan on rear side wall and 1 Fan on Right side wall of shielded enclosure
• 6 cut-off waveguide air vents: 2 at front door.1 on each of the two side walls. 2 at rear side wall.
• I/O Access panels on right side wall of the shielded enclosure.
• Castor Wheels on the base of shield box with shield box @ approx. 1’ height from ground.

Standard Accessories Included with the Box :-

• 3 Nos. - 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter  (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• 3 Nos. - Power strip with 4 Way Universal Folding Socket with Mains IDE Female Plug Socket.
• 3 Level Shelf Arrangement (Removable) inside the shield box for placement of laptops and accessories.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life
• Fully portable design equipped with caster wheels for ease of movement.
• Standard Rack Size to suit application specific requirements ,ideal for test platform.
  
  

RF Isolation : -  

• Front door will open Left to Right.
• 8 Fan:  All fans on the ceiling of shielded enclosure
• 18 cut-off waveguide air vents: 8Nos. on the ceiling. 5Nos. each of the two side walls.
• I/O Access panels on left side wall of the shielded enclosure.
• Castor Wheels on the base of shield box with shield box @ approx. 100mm height from ground.

 
Standard Accessories Included with the Box :-

• 8 Nos. - 120MM 1300 RPM / 65 CFM - Silent 230VAC Cooling Fan (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan with Power Adaptor – On Demand)
• 1 Nos. – Rack Rail Mount Power strip with 10 Way Universal Socket.
• 6 Level Slider Shelf Arrangement (Removable) inside the shield box for placement of devices.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life
• Fully portable design equipped with caster wheels for ease of movement.
• Standard Rack Size to suit application specific requirements ,ideal for test platform.
  
  

RF Isolation : -  

• Front door will open Top to bottom
• 2 fan: 1 fan on left side wall and 1 fan on right side wall of shielded enclosure
• 4 cut-off waveguide air vents: Two at front door. One on each of the two side walls
• I/O Access panels on right side wall of the shielded enclosure
• Castor Wheels on the base of shield box with shield box approx.1''height from ground

• 2Nos-120mm 1300 RPM/65 CFM-Ultra Silent 12VDC Cooling fan with universal input voltage adapter 78CFm ultra silent 12 VDC cooling fan on demand
• 3Nos Power strip with 4 Way Universal Folding Socket with Mains IDE Female Plug Socket
• 3 Level Shelf Arrangement (Removable) inside the shield box for placement of laptops and accessories

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G FR1 Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Portable / Vertically Stackable Shield Box. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

• Total Weight of Unit – 108 Kg.
• Front door will open left to right.
• 1 fan:  At rear side wall of shielded enclosure.
• 3 cut-off waveguide air vents: Two on Side Walls. Third at rear side Wall.
• I/O Access panels on left wall of the shielded enclosure.

• 300MM 1000 RPM / 660 CFM – 230VAC / 50 Hz Exhaust Fan with 4 Step Speed Regulator & C14 IEC Connector.
• Rack Mount Rails on Both Side Walls – With 3U Blank Plate on Right Wall with 16Amp Socket Connected to Power Filer.
• 2 Nos. Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, beBluetooth, R
• FID, 3G, 5G Device testing
• FID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life
• Fully portable design equipped with caster wheels for ease of movement.
• Customized Size to suit application specific requirements, ideal for test platforms.

RF Isolation : -

• Front door will open Top to Bottom.
• 4 Fan:  2 Fan on rear side wall and 1 Fan on both side wall of shielded enclosure.
• 6 cut-off waveguide air vents: 2 at front door.1 on each of the two side walls. 2 at rear side wall.
• I/O Access panels on right side wall of the shielded enclosure.
• Castor Wheels on the base of shield box with shield box @ approx. 1’ height from ground.

• 4 Nos. - 120MM 1500 RPM / 73 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter    (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life
• Fully portable design equipped with caster wheels for ease of movement.
• Standard Rack Size to suit application specific requirements ,ideal for test platform.
  
  

RF Isolation : -  

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life
• Customized Size to suit application specific requirements ,ideal for test platforms.

• Total Weight of Unit – 15 Kg
• Front door will open left to right.
• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front door. Second at rear side.
• I/O Access panels on rear wall of the shielded enclosure.

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

• ≥ 130 dB from 20 MHz to 1 GHz
• > 120 dB at 3 GHz
• > 90 dB at 5 GHz
• > 90 dB at 6 GHz

• Desktop / Benchtop RF Shield Box.
• Designed and Developed for WLAN, Wireless device testing.
• Ideal for 802.11a, b, g, n, ac
• Bluetooth, RFID, 3G Device testing

Features:

• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 6GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

Applications:

• Wireless testing
• Digital forensics
• R&D
• EMC Testing
• 5G Cellular Testing

Features :-

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac, ax
• Bluetooth, RFID, 3G , 5G FR1 Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Portable / Vertically Stackable Shield Box. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

• Total Weight of Unit – 108 Kg.
• Front door will open left to right.
• 1 fan:  At back side wall of shielded enclosure.
• 2 cut-off waveguide air vents: First at Right Side Wall. Second at rear side Wall.
• I/O Access panels on left wall of the shielded enclosure.

• 300MM 1000 RPM / 660 CFM – 230VAC / 50 Hz Exhaust Fan with 4 Step Speed Regulator & C14 IEC Connector.
• Rack Mount Rails on Both Side Walls – With 3U Blank Plate on Right Wall with 16Amp Socket Connected to Power Filer.
• 2 Nos. Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box. 

A portable RF shield box, also known as a portable RF enclosure or portable RF shielded enclosure, is a compact and lightweight version of an RF shield box that can be easily transported and used in various locations. It offers similar functionality as a benchtop or larger RF shield box but with the added advantage of portability.

Here are some key features and characteristics of a portable RF shield box:

1. Compact and lightweight design: Portable RF shield boxes are designed to be lightweight and compact for easy transportation. They are typically smaller in size compared to larger shield boxes, making them suitable for on-site testing or field applications.

2. Shielding effectiveness: Despite their smaller size, portable RF shield boxes provide a high level of shielding effectiveness to block external RF signals. They are constructed using conductive materials, such as aluminum or steel, that form a Faraday cage to contain and attenuate electromagnetic waves.

3. Collapsible or modular construction: Many portable RF shield boxes feature a collapsible or modular design, allowing them to be easily assembled and disassembled for transportation or storage. This design enables quick setup and breakdown in different locations.

4. Access ports and connectors: Portable RF shield boxes have specialized access ports, connectors, and cable management systems to allow cables, antennas, and other connections to enter or exit the enclosure while maintaining the shielding integrity. These ports may have seals or gaskets to prevent RF leakage.

5. Ventilation and cooling: To prevent overheating, portable RF shield boxes may include ventilation systems such as fans or vents. These help dissipate heat generated by the enclosed equipment during testing or operation.

6. Viewing window: Some portable RF shield boxes feature a transparent viewing window, often made of conductive glass or RF-transparent material, to allow visual inspection of the equipment inside without compromising the shielding effectiveness.

7. Mobility features: Portable RF shield boxes may have features such as handles, wheels, or carrying cases to facilitate easy transportation and mobility.

Portable RF shield boxes are commonly used in applications where on-site or field testing of RF devices or equipment is required. They are used in industries such as telecommunications, broadcasting, wireless technology, IoT deployments, and military applications. Their portability allows for flexible testing and evaluation of RF devices in different environments while maintaining the necessary RF isolation and shielding.

• ≥ 130 dB from 20 MHz to 1 GHz
• > 120 dB at 3 GHz
• > 90 dB at 5 GHz
• > 90 dB at 6 GHz

• Designed and Developed for WLAN, Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ad - For Devices up-to 60 ~ 65 GHz.
• Bluetooth, RFID, 3G Device testing, Beam Formation.

Features:

• Thick RF absorbing foam deadens standing waves and reflections.
• Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details:

• Front door will open left to right

Standard Accessories Included with the Box:

• Power strip with 4 way universal folding socket with mains ide female plug socket to go with AC I/O socket of box
• Wooden mica base plate inside the box as an insulated surface to place DUT and other units inside the box

Features :-

• Designed and Developed for housing Environmental Test Chamber i.e. : Test Equity 105/107 Temperature Chamber.
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing
• Wide range of I/O connector options.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Equipped with Sliding of Weight Capacity 75 Kg.
• Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

• Front door will open left to right.
• 19” - 20U Rack Mounting Provision on Top Surface of Shield Box.
• 1 Nos. - Waveguide - At rear side for water drain.
• 1 Nos. Fan:  On rear wall of shielded enclosure
• 2 Nos. - Cut-off waveguide air vents: 1 at front door. 1 on the rear wall.
• I/O Access panels on both side walls of the shielded enclosure.
• Castor Wheels with base frame keeping shield box @ approx. 3.5” height from ground.

Standard Accessories Included with the Box :-

• 1 Nos. - 280MM 2550 RPM / 1098 CFM - Ultra Silent 48VDC Cooling Fan  with Universal Input Voltage Power Supply.
• 2 Nos. – Wonpro Power strip with 5 Way Universal Socket with Mains Plug Socket.
• Fixed LED Light Mounted inside the Box with Power Supply Adapter.