Benchtop RF Shield Box

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features:-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
•  Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Customized Size to suit application specific requirements ,ideal for test platforms.

RF Isolation : -  

Access panel Standard Configuration:

Product Details:

• Designed and Developed for WLAN, Wireless device testing.
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged welded aluminium construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 36.5 Kg.
• Front door will open left to right.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box  :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter
• Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Product Details:

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open bottom to top.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 5000 NOS/ MONTH

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features:-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
•  Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Customized Size to suit application specific requirements ,ideal for test platforms.

RF Isolation : -  

Mechanical Details:

• Total Weight of Unit – 15.0 Kg
• Door will open from top front to rear
• 1 fan: At right side wall of shielded enclosure
• 3 cut off waveguide air vents: One at top door. One at front side and one at right side wall
• I/O Access panels on sides of the shielded enclosure.

• 60 mm 3000 rpm/54 cfm Ultra Silent 12VDC Cooling Fan with Universal Input Voltage Adapter
• Power strip with 4 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box
• Wooden-Mica Base Plate inside the box as an insulated surface-to place DUT and other units inside the box

Additional Information:

• Production Capacity: 5000 NOS/ MONTH

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features:-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
•  Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Customized Size to suit application specific requirements ,ideal for test platforms.

RF Isolation : -  

• Desktop / Benchtop RF Shield Box.
• Designed and Developed for WLAN, Wireless device testing.
• Ideal for 802.11a, b, g, n, ac , ax
• Bluetooth, RFID, 3G Device testing

Product Details:

• Designed and Developed for WLAN, Wireless device testing.
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged welded aluminium construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

• Total Weight of Unit – 36.5 Kg

• Front door will open left to right.
• 2 fan:  At rear side wall of shielded enclosure
• 4 cut-off waveguide air vents: Two at front door. Two at rear side.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)

• Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.

• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 5000 NOS/ MONTH

Product Details:

• Designed and Developed for WLAN, Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 6GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 15.0 Kg
• Door will open from top front to rear.
• 1 fan:  At right side wall of shielded enclosure
• 3 cut-off waveguide air vents: One at top door. One at front side and one at right side wall.
• I/O Access panels on sides of the shielded enclosure.

Standard Accessories Included with the Box :-

• 60MM 3000 RPM / 54 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter
• Power strip with 4 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 5000 NOS/ MONTH

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Compact Bench-top design for convenience of testing.

Mechanical Details :-

• Total Weight of Unit – 20.0 Kg
• Front door will open top to bottom.
• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front side. Second at rear side.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 5000 NOS/ MONTH

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Compact Bench-top design for convenience of testing.

RF Isolation : -  

Mechanical Details :-

• Total Weight of Unit-8 Kg
• Front door will open Left to Right.
• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front side. Second at rear side.
• I/O Access panels on rear wall of the shielded enclosure.

 Standard Accessories Included with the Box :-

• 60MM 4700 RPM ± 15 % a rated values/ 26.4 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter
• Wonpro Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 2000 Pcs/Month

Product Details:

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Compact Bench-top design for convenience of testing.

RF Isolation : -               

Mechanical Details :-

• Total Weight of Unit – 20.0 Kg
• Front door will open top to bottom
• 1 fan:  At rear side wall of shielded enclosurE.
• 2 cut-off waveguide air vents: First at front side. Second at rear side.
• I/O Access panels on rear wall of the shielded enclosure.

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter  (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 2000 Pcs/Month
• Delivery Time: 2 - 4 Weeks
• Packaging Details: Export Grade Packaging

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features:-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
•  Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Customized Size to suit application specific requirements ,ideal for test platforms.

RF Isolation : -  

Mechanical Details :-

• Total Weight of Unit – 114 Kg
• Front door will open left to right.
• 2 fan:  At back side wall of shielded enclosure
• 4 cut-off waveguide air vents: Two at front door. Two at rear side.
• I/O Access panels on back wall of the shielded enclosure.

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fans  with Universal Input Voltage Adapter  (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
•  Wonpro - Power strip with 5 Way Universal Folding Socket with Mains Male Plug Socket to go with AC I/O Socket of Box.
• 3 Nos. Fixed LED Light Mounted 1 on the ceiling inside the Box and 2 on Left side of box with Power Supply Adapter.
• 3 Level Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 5000 NOS/ MONTH

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features:-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
•  Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Customized Size to suit application specific requirements ,ideal for test platforms.

RF Isolation : -  

Mechanical Details :-

• Total Weight of Unit – 114 Kg
• Front door will open left to right.
• 2 fan:  At back side wall of shielded enclosure
• 4 cut-off waveguide air vents: Two at front door. Two at rear side.
• I/O Access panels on back wall of the shielded enclosure.

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fans  with Universal Input Voltage Adapter  (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
•  Wonpro - Power strip with 5 Way Universal Folding Socket with Mains Male Plug Socket to go with AC I/O Socket of Box.
• 3 Nos. Fixed LED Light Mounted 1 on the ceiling inside the Box and 2 on Left side of box with Power Supply Adapter.
• 3 Level Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 5000 NOS/ MONTH

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax
• Bluetooth, RFID, 3G , 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Compact Bench-top design for convenience of testing.

RF Isolation : -  

• Total Weight of Unit – 20.0 Kg
• Front door will open top to bottom.
• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front side. Second at rear side.
• I/O Access panels on rear wall of the shielded enclosure.

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 5000 NOS/ MONTH

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN, Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

• Total Weight of Unit –35 Kg
• Front door will open Left to Right.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 5000 NOS/ MONTH

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life.
• Customized Size to suit application specific requirements , ideal for test platforms.

RF Isolation : -  

Mechanical Details :-

• Total Weight of Unit – 40.0 Kg
• Front door will open left to right.
• 2 fan:  At back side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side.
• I/O Access panels on back wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 4 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 5000 NOS/ MONTH

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac , ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Table Top design for the convenience of testing.

RF Isolation : -  

Mechanical Details :-

• Total Weight of machine – 12 Kg
• Door will open from top front to rear.
• 1 fan:  At back side wall of shielded enclosure.
• 2 cut-off waveguide air vents: First on the door of each part of shielded enclosure. Second at rear side of shielded enclosure.
• I/O Access panels on back wall of the shielded enclosure as well as on Front Side of shielded enclosure.

Standard Accessories Included with the Box :-

• 60MM 4700 RPM ± 15 % a rated values / 26.4 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter
• Wonpro  Power strip with 3 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 5000 NOS/ MONTH

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G FR1 Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Compact Bench-top design for convenience of testing.

RF Isolation : -  

Mechanical Details :-

• Total Weight of Unit-8  Kg
• Front door will open Left to Right.
• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front side. Second at rear side.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 60MM 4700 RPM ± 15 % a rated values / 26.4 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter
• Wonpro Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 10000 NOS. / MONTH

Product Details:

Features:-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
•  Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life. Bench-top / Table-Top Shield Box Design.
• Customized Size to suit application specific requirements ,ideal for test platforms.

RF Isolation : -  

• SMA bulk head-4Nos
• usB 2.0/3.0-2 Nos
• DB9-1 Nos
• Duplex Fiber Coupler, ST/ST-1 Nos
• 10/100/1000/10G RJ45-2 Nos

• Door will open from top front to rear.
• 2 cut off waveguide air vents: First on the door of each part of shielded enclosure. Second at bottom side of shielded enclosure. 1-Waveguide at the front side of shielded enclosure
• I/O Access panels on back wall of the shielded enclosure as well as on front side of shielded enclosure

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life.
• Customized Size to suit application specific requirements , ideal for test platforms.

RF Isolation : -  

Mechanical Details :-

• Total Weight of Unit – 28.0 Kg
• Front door will open left to right.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 4 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 5000 NOS/ MONTH

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 40.0 Kg
• Front door will open left to right.
• 2 fan:  At back side wall of shielded enclosure
• 4 cut-off waveguide air vents: Two at front door. Two at rear side.
• I/O Access panels on back wall of the shielded enclosure.

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 4 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 5000 NOS/ MONTH

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life
• Customized Size to suit application specific requirements , ideal for test platforms.

RF Isolation : -  

Mechanical Details :-

• Total Weight of Unit – 28.0 Kg
• Front door will open left to right.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Power strip with 4 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 5000 NOS/ MONTH

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing.
• Ideal for 802.11a, b, g, n, ac , ax, be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Table Top design for the convenience of testing.

• Total Weight of machine – 12 Kg
• Door will open from top front to rear.
• 2 cut-off waveguide air vents:1 on the door of shielded enclosure.1 Waveguide at the rear side of shielded enclosure.
• 1fan:  At rear side wall of shielded enclosure
• I/O Access panels on both side wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 60MM 4700 RPM ± 15 % a rated values / 26.4 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter.
• Wonpro Power strip with 3Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 50000 NOS./MONTH

Product Details:

Features :-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
•  Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

RF Isolation : -  

• Total Weight of Unit – 20 Kg
• Front door will open left to right.
• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front door. Second at rear side.
• I/O Access panels on both side wall of the shielded enclosure.

 
• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter
• (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Additional Information:

• Production Capacity: 5000 NOS/ MONTH

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax , be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life. 
• Customized Size to suit application specific requirements, ideal for test platforms.

RF Isolation : -  

Mechanical Details :-

• Total Weight of Unit – 51.600 Kg
• Front door will open left to right.
• 1 fan:  At rear side wall of shielded enclosure
• 2 cut-off waveguide air vents: First at front door of shielded enclosure, second at rear side of shielded enclosure.
• I/O Access panels on back wall of the shielded enclosure.

• 120MM 1500 RPM / 73 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter 
• (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box. 
• MIMO Antenna Assembly (Optional)

Product Details:

Hardik Electronics specializes in design and development of Modular I/O Filter Plates with variety of connector options. This enables an easy to install and providing best shielding effectiveness of RF Shield Box made by using Modular I/O Filter Plates.

Features :-

• Designed and Developed for WLAN , Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax , be
• Bluetooth, RFID, 3G, 5G Device testing
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life. 
• Customized Size to suit application specific requirements, ideal for test platforms.

RF Isolation : -  

Product Details:

Features :-
 

• Designed and Developed for WLAN, Wireless device testing
• Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G, 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

• Total Weight of Unit – Kg
• Front door will open bottom to up.
• 1 cut-off waveguide air vents at door.
• I/O Access panels on 4 side wall of the shielded enclosure.

Additional Information:

• Production Capacity: 5000 NOS/ MONTH

Product Details:

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open bottom to top.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Product Details:

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open bottom to top.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Product Details:

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open bottom to top.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Product Details:

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open bottom to top.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Product Details:

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open bottom to top.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Product Details:

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open bottom to top.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Product Details:

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open bottom to top.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Product Details:

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open bottom to top.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Product Details:

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open bottom to top.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Product Details:

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open bottom to top.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Product Details:

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open bottom to top.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Product Details:

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open bottom to top.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Product Details:

• Designed and Developed for WLAN, Wireless device testing??? Ideal for 802.11a, b, g, n, ac, ax, be
• Bluetooth, RFID, 3G , 5G Device testing.
• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 12GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Ideal for bench-top shield box applications. Rugged construction for long life.
• Customized Size to suit application specific requirements, ideal for test platforms.

Mechanical Details :-

• Total Weight of Unit – 30.7 Kg
• Front door will open bottom to top.
• 2 fan:  At rear side wall of shielded enclosure.
• 4 cut-off waveguide air vents: Two at front door. Two at rear side Wall.
• I/O Access panels on rear wall of the shielded enclosure.

Standard Accessories Included with the Box :-

• 120MM 1300 RPM / 65 CFM - Ultra Silent 12VDC Cooling Fan  with Universal Input Voltage Adapter (Option: 120MM 1800 RPM / 78 CFM - Ultra Silent 12VDC Cooling Fan – On Demand)
• Wonpro - Power strip with 5 Way Universal Socket with Mains Plug Socket to go with AC I/O Socket of Box.
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden - Mica Base Plate inside the box as an insulated surface - to place DUT and other units inside the box.

Product Details:

• ≥ 130 dB from 20 MHz to 1 GHz
• > 120 dB at 3 GHz
• > 90 dB at 5 GHz
• > 90 dB at 6 GHz

• Desktop / Benchtop RF Shield Box.
• Designed and Developed for WLAN, Wireless device testing.
• Ideal for 802.11a, b, g, n, ac
• Bluetooth, RFID, 3G Device testing

Features:

• Wide range of I/O connector options.
• Thick RF absorbing foam deadens standing waves and reflections.
• Higher Level Isolation up-to 6GHz for accurate performance.
• Equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
• Rugged construction for long life
• Customized Size to suit application specific requirements, ideal for test platforms.

Applications:

• Wireless testing
• Digital forensics
• R&D
• EMC Testing

• Front door will open left to right.
• 2 fan: At back side wall of shielded enclosure
• 4 cut off waveguide air vents: Two at front door. Two at rear side
• I/O Access panels on back wall of the shielded enclosure.

• 120 mm 1300 rpm/65 cfm ultra silent 12 vdc cooling fan with universal input voltage adapter option 120 mm 1800 rpm/78 cfm ultra silent 12 vdc cooling fan
• Power strip with 4 Way Universal Folding Socket with Mains IDE Female Plug Socket to go with AC I/O Socket of Box
• Fixed LED Light Mounted on the ceiling inside the Box with Power Supply Adapter.
• Wooden-Mica Base Plate inside the box as an insulated surface-to place DUT and other units inside the box

Additional Information:

• Item Code: HDRF-2570